Low Rider Extrusion Crossbar Mounts Inexpensive

Designed to mount your extrusion crossbars as low as low can go, these brackets feature integrated tie-down points and slotted crossbar mounts to give you flexibility in the length of bar you choose. The drop from the center of the mounting channel (on the stock side rail) to the bottom of the extrusion crossbar is 0.6”. On the GX470, the extrusion crossbar sits less than 0.25” above the roofline. Please measure the drop between your side rails and the roofline to ensure fitment. (If necessary, you can raise the extrusion crossbar with spacers to clear the roof.)

All brackets:

• Sold in pairs.

• Come in matte black powdercoat.

• Include the necessary hardware for mounting to your stock rack.

• Can be paired with our High / Low bracket.

• Include 3mm shims for fine-tuning the fit/clearance of your extrusion crossbars.

Click here to order your crossbars (NOTE: you need to measure for your vehicle and then adjust the length of the crossbar in the cart before ordering):

• To order your extrusion crossbar: Click here to access our pre-filled cart (one rail with mounting bolts per cart).

These brackets will mount to the stock roof rails on:

• GX470

• 5th Gen 4Runner

• 4th Gen 4Runner

• 200 Series Land Cruiser/LX570 (NOTE: the rack changed for 2016+ models and likely will not work)

• 100 Series Land Cruiser/LX470

• 80 Series Land Cruiser/LX450

• 2nd Gen Sequoia

• 1st Gen Sequoia

The brackets will NOT mount to:

• GX460

• LX570/600 (2016+)

• Any vehicle that does not have an inside channel on the roof rails as seen in the photos

• Tube-style racks like the FJ Cruiser or TRD Pro 4Runner Rack

May work on other vehicles.