What is CA Glue Accelerator Spray?

A CA glue accelerator spray is a specialized product designed to enhance the adhesive properties of cyanoacrylate in scale modeling and various crafting applications. This accelerator for super glue is formulated with chemicals that stimulate a rapid chemical reaction in the cyanoacrylate adhesive, causing it to solidify and bond surfaces together quickly and securely. It expedites the bonding process of cyanoacrylate adhesive, making it particularly valuable for scale model enthusiasts. Its advantages in the realm of craft and modeling include accelerated assembly, reinforced bonds, and precise product application for intricate model components.

Superglue is formulated to cure and bond on its own when exposed to moisture in the air. However, there are certain scenarios where using an accelerator can be advantageous:

• Accelerating the curing process: Depending on the type and thickness of the superglue and the conditions in which it is used, it can take some time for the superglue to cure fully. An activator can significantly speed up this process, allowing for a quicker bond.
• Ensuring a rapid bond: In situations where an instant, strong bond is needed, such as in some DIY repairs or model building, a CA activator spray can help ensure the pieces bond quickly and securely.
• Enhancing bond strength: An activator can improve the overall bond strength, making the ciano more durable and resilient.
• Facilitating bonding in challenging conditions: In dry or low-humidity environments, cyano may not cure as quickly as desired. Activators are especially useful in these conditions to ensure a reliable bond.

Not all gluing applications require an accelerator. For many everyday uses, like household repairs or bonding plastics, cyanoacrylate glue works fine without an activator. However, when speed, strength, or specific conditions are important, using a cyanoacrylate activator can be very helpful.

The CA accelerator spray can be applied before or after the cyanoacrylate, but it works best when sprayed onto the surface to be glued before applying the ciano. This method vastly accelerates the curing process, crystallizing the cyanoacrylate almost instantly, eliminating the tedious waiting time for the adhesives to dry and allowing you to continue working immediately. Be prepared, as it can dry very fast!

How to use an Activator Spray for super glue?

To use an Activator Spray for super glue effectively, begin by preparing your workspace, ensuring it is well-ventilated to avoid inhaling fumes.  Clean the surfaces to remove any dust or grease, then position the items correctly for bonding. Apply a small amount of cyanoacrylate to one surface, being careful not to over-apply. Shake it well, then lightly apply a fine mist onto the other surface, ensuring complete but not excessive coverage.

Immediately press the two surfaces together, allowing the accelerator to rapidly initiate the curing process. Hold the surfaces firmly for a few seconds to ensure a strong bond, as the cyano will harden almost instantly. After bonding, check the alignment and bond strength, and remove any excess carefully. Close the accelerator spray can and store it in a cool, dry place away from sunlight and ignition sources.

Always wear gloves and safety goggles for protection, and ensure proper ventilation. Keep this product away from open flames and store it securely. 

Content:

It contains 200ml of Activator Spray for Super Glue

Safety Notices:

– Use only outdoors or in a well-ventilated area.
– Do not breathe gas/fumes/vapor
– Keep out of the reach of children.
– Avoid contact with skin and eyes.
– Do not apply on naked flames or any incandescent material.
– Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Keep away from sources of ignition. No smoking.
– Keep the product tightly closed in a cool place and a place with adequate ventilation.
– Careful if applying onto painted parts, as it could harm dry paint.